Câmaras de teste de confiabilidade ambiental

• Grande capacidade: 45m³ de volume efetivo para extensas necessidades de testes.
• Ampla faixa: Faixa de temperatura: 0 ° C a + 90 ° C; Umidade: 20% –98% UR.
• Controle preciso: flutuação de temperatura de ± 1 ° C, flutuação de umidade de ± 2,5% RH.
• Design durável: Suporta até 2000KG/m², equipado com piso antiderrapante e carros de esteira resistentes.
• Compatível com os padrões: Atende a vários padrões internacionais de testes ambientais.

• Ampla faixa de temperatura e umidade: -40°C a +150°C, umidade 20%-98% RH.
• Controle de alta precisão: Flutuação de temperatura ±0,5 °C, flutuação de umidade ±2,5% RH.
• Vários tamanhos disponíveis: De modelos compactos de 80L a modelos de 1000L de grande capacidade.
• Conformidade com os padrões internacionais: Suporta os padrões de teste ambiental GB/T e IEC.
• Operação Eficiente em Energia e Silenciosa: Nível de ruído ≤75dB.
• Materiais duráveis: interior em aço inoxidável SUS304# para confiabilidade duradoura.

This equipment is suitable for all kinds of electrical and electronic products and other products, parts and materials to carry out high and low temperature constant and gradual change, humidity and heat test and other environmental simulation reliability test.

other uses may cause injury to personnel and damage to equipment.

Sample limit

Testing and storage of samples of flam mable。

In addition to testing the adaptability and the characteristics of the product had been changed under the general conditions of temperature and humidity combination (High-low temperature & storage, temperature cycling, high temperature and high humidity or moisture condensation test) by simulatable products, low humidity and constant temperature-humidity test chamber can also test whether the crazing and breakage of the product would happen under the conditions of low temperature and low humidity, high temperature and low humidity, high temperature and high humidity, low temperature and high humidity. Further more, the static content in air under the low humidity condition is many time more than the general condition, and it is said that most damage of the electronic components is caused by static.
Meeting the requirements of international specification test (IEC, JIS. JB, MIL...) to ensure the consistency of international measurement programs (including testing procedures, conditions and methods) to avoid cognitive differences and reduces the measurement uncertainties.

High and low temperature test chamber applying to electrical engineering, electronic products, components and the adaptive test of materials during storage, transportation and use in high and low temperature.

Designed for a variety of electronic products machine high and low temperature and humidity test, LED, PCB and other products aging test, special requirements can be customized, such as low-temperature and low-humidity test recognized: 3 ℃/10% RH; 2, 5C/10% RH, etc., the size of the inner box to accept customized, temperature and humidity Fan to accept customized. Laboratory floor load-bearing capacity: 600kg/m2 (uniform load) made of fully welded stainless steel SUS304 non-slip plate.

Thermal Shock Test Chamber is designed to test the material structure or composite materials, in the instant after the extremely high temperature and extremely low temperature under the continuous degree of tolerance, in order to test in the shortest possible time due to thermal expansion and contraction of the chemical changes caused by or physical damage. To be tested completely static test mode is the current electronic parts testing, research, and semiconductor production line with a large number of screening, can save a lot of consumables testing costs. Fast operation and high reliability. Suitable for metal, plastic, rubber, electronics, aerospace .... Material testing.

Designed for all kinds of electrical and electronic, automotive, metal, plastic, chemical, aerospace, medical building materials and other products, parts and materials for high and low temperature constant and gradual change of hot and humid test and other environmental simulation reliability test.

Testador de névoa salina Projetado para testar a resistência à corrosão da superfície de vários materiais após pintura, revestimento, revestimento e anodização.

Padrão
de teste GB / T5170.8, GB / T2423.17, ISO-376837693770, ASTM-B117B268, JIS-DO201H8502 H8610K5400Z2371